Perceptive Content: Linking Documents Using WebNow

  1. Log in to Perceptive Content Web Interface (WebNow) and click on the Capture icon

 
  1. On the left side of the screen select the Drawer and the Document Type you will be using
    1. WebNow requires that you fill in at least one of the fields located below the Drawer. This could be a date or anything pertaining to the document

 
  1. Once you have selected the drawer and the document type, go to the right side of the screen and select Add

 
  1. This will bring up the browser. Select the document that you wish to link into WebNow and click Capture
    1. If you are capturing multiple documents, repeat steps 3 and 4

 
  1. It will take a moment for the image to upload and then your screen should look like the one that is shown below with your document appearing in the middle of the screen. The document is highlighted in blue in the picture

 
  1. Verify that you have the correct document uploaded, then click Create Document in the bottom right-hand corner of the screen

 
  1. The page will take a moment to load and if your capture was successful, then the message box shown below will appear
Print Article